Abhishek Singh : +91 - 9555353786
+91 - 7011443815
Avinash Singh : +91 - 9899350816
Abhinav : +91 - 8368679079

Email Id : saitechnologies564@gmail.com



  • Horizontal Triple Walled Autoclaves are most ideal for critical applications requiring assured and reliable total destruction of all living micro-organisms.
  • All ideal tool for Laboratories, hospitals, nursing home, R&D labs etc.


  • The inner chamber, steam jacket, outer chamber and boiler are made of heavy gauge stainless steel with leak proof argon arc welding. Lid is made of thick machined Mild Steel plate lined with stainless steel from inside.
  • The space between the outer chamber and steam jacket is filled with glass wool to minimize thermal losses.
  • Hydraulically tested to withstand 2.5 times the working pressure.
  • Steam boiler is fitted with water level indicator, pressure gauge, low water cut-off device and automatic pressure control device.
  • Fitted with safety valve as a safety device.
  • Drain valve is fitted at the side bottom for easy draining/cleaning. The unit is provided with a positive self-locking safety door which cannot be opened while the chamber is under pressure and disengages automatically when chamber is exhausted.
  • This affords complete safety to the working personnel against explosive opening.
  • Two separate valves are provided for evacuating steam from inner chamber and jackets as and when desired.
  • Sterilization Cycle is controlled by SINGLE POINT MULTIPORT Valve.
  • The chamber discharge line is fitted with a moisture trap to absorb the condensate automatically thus preventing moistening of the loaded material to be sterilized.
  • An automatic vacuum breaker is fitted to all units as a standard accessory, in order to break vacuum in case of steam condensation. The flanged immersion type heating element made from very high grade material provides fast formation of pressure in the system and are protected through a electric low water level cut-off device.
  • All Sterilizers are provided with triple safety features, through a "PIEZOSTAT" (Automatic Pressure Control System) and a spring loaded safety valve fitted to the boiler/steam generator. The chamber is fitted with spring loaded safety valve and a dead weight release valve.
  • Highly accurate temperature indicator is fitted for monitoring temperature.
  • To work on 440Volts, 3phase, 50Hz AC supply.

Technical Specifications & Ordering Informations,

MODEL (With Tubular Stand & Supporting Ring of M.S.) #SAI-88 #SAI-162 #SAI-165 #SAI-221
MODEL (All S.S. Body) #SAISS-88 #SAISS-162 #SAISS-165 #SAISS-221
Inner Dimensions (Dia x Depth) 400x600 mm 400x1100 mm 500x900 mm 500x1200 mm
Capacity 88 ltrs 162 ltrs 165 ltrs 221 ltrs
Heater Load 6.0 KW 9.0 KW 9.0 KW 12.0 KW
Gasket Made of Jointless Silicon Rubber
Display Dial Thermometer (Standard with the unit)
Exhaust of Pressure Manual through a Exhaust valve
Sterilizing Pressure 1.2 to 1.5 kgf /cm² (15 to 20 psi) at 121ºC
Operating Pressure From 15 Psi to 20 Psi
Pressure Gauge 0-2.1 kgf /cm² (30 psi)
MOC (Pressure Vessel) Stainless Steel (SS-304)
MOC (Jacket) Stainless Steel (SS-304)
MOC (External Wall) Stainless Steel (SS-304)
MOC (Boiler) Stainless Steel
MOC (Lid) Made of thick machined Stainless Steel plate
POWER SUPPLY 440V AC, 3 Phase Supply
Tubular Stand and Support Ring Made of mild steel or stainless steel (as ordered)
Double Door (OPTION) Option available at extra cost


  • Digital Temperature Indicator can be supplied in lieu of dial thermometer.
  • Microprocessor Based Semi-Automatic Digital Controller with AUTO-TIME CONTROL SYSTEM. After the set temperature is attained the timer starts automatically and on completion of set count down/up time the supply to heaters is cut-off and the system sounds a buzzer alerting user that the cycle is over.
  • Digital Pressure Indicator displayed directly into the main control panel.
  • Extra injector in addition to vacuum dry can be provided at an extra cost for better drying.
  • POP type safety valve in lieu of spring loaded safety valve at an extra cost.
  • Double door for any of the above models to cost extra.
  • Temperature recorder for recording temperature will cost extra.
  • SOFKLAVE 2000:
    1. A semiautomatic MICRO CONTROL system with total 4 fixed programs (selectable manually) with digital temperature control and CENTRONIC OUTPUT PORT for on-line printing.
    2. do- same as above but with 5 fixed programs and one flexible sterilization cycle with digital temperature control and CENTRONIC OUTPUT PORT for on line Printing.
  • SOFKLAVE 2000(PRO) : An INEGRATED FULLY AUTOMATIC LCD AUTO-CONTROL PROGRAMME with PLC and built in HMI controller having 5 fixed programmes and one flexible sterilization cycle with 16x2 alphanumeric display and CENTRONIC OUTPUT PORT for on-line printing.
  • Multipoint Temperature/Pressure Scanner with LCD display and CENTRONIC port for printer. Total 6 scanning points with five for temperature and on for pressure. Supplied complete with Nos. RTD probes and communication cable for attaching to printer.